Clamp, 2 Pieces, anodized 6061-T6 aluminum, with stainless steel plate
Requires ⌀3mm rod and 8x M3x0.5 Thumb Screws, not included.
These clamps have 16 grooves at 2.54mm (0.1") spacing on one side. They are perfect for aligning and holding parts while you solder. The stainless steel plate can be attached to either the grooved side or the smooth side of the clamp body. Designed to slide along 3mm rods to ensure alignment. Great for soldering wires to a header, or wires to LEDs, or ...
90° Tee, 4 pieces, anodized 6061-T6 aluminum Requires 2x M3 Thumb Screws per 90° Tee, not included Can be used to hold 3mm rod at 90° to each other. Screw...
Cast base, 140mm x 200mm, approximately 1Kg, textured finish This base is the foundation of the PCBGRIP system. The hole in the middle is threaded M10x1.5. The hole nearest the...
Cylinder, 4 Pieces, anodized 6061-T6 aluminum Requires 1x Thumb Screw per Cylinder, not included Designed to attach to the OpenBeam and support a 3mm rod.