Variable Tee, 4 Pieces, anodized 6061-T6 aluminum.
Requires 1x M3 Thumb Nut and 1x M3 Thumb Screw per Variable Tee, not included.
Used to hold one 3mm rod at any angle relative to another piece of 3mm rod. Can also be used to hold wires or pogo pins up to ⌀1.5mm.
90° Tee, 4 pieces, anodized 6061-T6 aluminum Requires 2x M3 Thumb Screws per 90° Tee, not included Can be used to hold 3mm rod at 90° to each other. Screw...
Cast base, 140mm x 200mm, approximately 1Kg, textured finish This base is the foundation of the PCBGRIP system. The hole in the middle is threaded M10x1.5. The hole nearest the...
Clamp, 2 Pieces, anodized 6061-T6 aluminum, with stainless steel plate Requires ⌀3mm rod and 8x M3x0.5 Thumb Screws, not included. These clamps have 16 grooves at 2.54mm (0.1") spacing on one...